Motive Gear Differential Ring and Pinion Rear C8.25-410 for Jeep Wrangler 2007-2018

If you're diving into the world of performance upgrades, you’ve probably heard of Motive Gear. These guys make some seriously tough drive train components, and I can tell you from experience that their stuff holds up under pressure. Whether you're hitting the trails or just want to beef up your daily driver, their differential ring and pinion gear is a solid choice. What You Need to Know This particular set is designed for Chrysler 8.25" and 8.375" differentials. With a 4.10 gear ratio, it gives you that nice balance between power and efficiency. You’ll want to make sure your carrier has a 2.71 ratio or higher for it to fit properly. It’s dual drilled for both 3/8" and 10mm bolts, which is pretty handy if you're working with different setups. Specs and Features Important Notes Keep in mind, this setup fits in the rear position of your vehicle. You’ll need a notched cross pin (part number 80-0278-1) for the ring gear clearance, so don’t forget to grab that if you don’t have one already. Fitment This ring and pinion is compatible with a range of Chrysler and Dodge models, including: So, if you’re serious about getting the most out of your ride, check out this Motive Gear ring and pinion. It’s built to last, and it’ll definitely give you the edge you’re looking for on or off the road. Proposition 65 ⚠ WARNING: Cancer and Reproductive Harm https://www.P65Warnings.ca.gov